(1) (a) Except as provided in Subsection (1)(c), the division upon registering a vehicle shall issue to the owner: (i) one license plate for a motorcycle, trailer, or semitrailer; (ii) one decal for a park model recreational vehicle, in lieu of a license plate, which shall be attached in plain sight to the rear of the park model recreational vehicle; (iii) one decal for a camper, in lieu of a license plate, which shall be attached in plain sight to the rear of the camper; and (iv) two identical license plates for every other vehicle. (b) The license plate or decal issued under Subsection (1)(a) is for the particular vehicle registered and may not be removed during the term for which the license plate or decal is issued or used upon any other vehicle than the registered vehicle. (c) (i) Notwithstanding Subsections (1)(a) and (b) and except as provided in Subsection (1)(c)(ii), the division, upon registering a motor vehicle that has been sold, traded, or the ownership of which has been otherwise released, shall transfer the license plate issued to the person applying to register the vehicle if: (A) the previous registered owner has included the license plate as part of the sale, trade, or ownership release; and (B) the person applying to register the vehicle applies to transfer the license plate to the new registered owner of the vehicle. (ii) The division may not transfer a personalized or special group license plate to a new registered owner under this Subsection (1)(c) if the new registered owner does not meet the qualification or eligibility requirements for that personalized or special group license plate under Sections 41-1a-410 through 41-1a-422.

(a) Except as provided in Subsection (1)(c), the division upon registering a vehicle shall issue to the owner: (i) one license plate for a motorcycle, trailer, or semitrailer; (ii) one decal for a park model recreational vehicle, in lieu of a license plate, which shall be attached in plain sight to the rear of the park model recreational vehicle; (iii) one decal for a camper, in lieu of a license plate, which shall be attached in plain sight to the rear of the camper; and (iv) two identical license plates for every other vehicle.

(i) one license plate for a motorcycle, trailer, or semitrailer;

(ii) one decal for a park model recreational vehicle, in lieu of a license plate, which shall be attached in plain sight to the rear of the park model recreational vehicle;

(iii) one decal for a camper, in lieu of a license plate, which shall be attached in plain sight to the rear of the camper; and

(iv) two identical license plates for every other vehicle.

(b) The license plate or decal issued under Subsection (1)(a) is for the particular vehicle registered and may not be removed during the term for which the license plate or decal is issued or used upon any other vehicle than the registered vehicle.

(c) (i) Notwithstanding Subsections (1)(a) and (b) and except as provided in Subsection (1)(c)(ii), the division, upon registering a motor vehicle that has been sold, traded, or the ownership of which has been otherwise released, shall transfer the license plate issued to the person applying to register the vehicle if: (A) the previous registered owner has included the license plate as part of the sale, trade, or ownership release; and (B) the person applying to register the vehicle applies to transfer the license plate to the new registered owner of the vehicle. (ii) The division may not transfer a personalized or special group license plate to a new registered owner under this Subsection (1)(c) if the new registered owner does not meet the qualification or eligibility requirements for that personalized or special group license plate under Sections 41-1a-410 through 41-1a-422.

(i) Notwithstanding Subsections (1)(a) and (b) and except as provided in Subsection (1)(c)(ii), the division, upon registering a motor vehicle that has been sold, traded, or the ownership of which has been otherwise released, shall transfer the license plate issued to the person applying to register the vehicle if: (A) the previous registered owner has included the license plate as part of the sale, trade, or ownership release; and (B) the person applying to register the vehicle applies to transfer the license plate to the new registered owner of the vehicle.

(A) the previous registered owner has included the license plate as part of the sale, trade, or ownership release; and

(B) the person applying to register the vehicle applies to transfer the license plate to the new registered owner of the vehicle.

(ii) The division may not transfer a personalized or special group license plate to a new registered owner under this Subsection (1)(c) if the new registered owner does not meet the qualification or eligibility requirements for that personalized or special group license plate under Sections 41-1a-410 through 41-1a-422.

(2) The division may receive applications for registration renewal, renew registration, and issue new license plates or decals at any time prior to the expiration of registration.

(3) (a) (i) All license plates to be manufactured and issued by the division shall be treated with a fully reflective material on the plate face that provides effective and dependable reflective brightness during the service period of the license plate. (ii) For a historical support special group license plate created under this part, the division shall procure reflective material to satisfy the requirement under Subsection (3)(a)(i) as soon as such material is available at a reasonable cost. (b) The division shall prescribe all license plate material specifications and establish and implement procedures for conforming to the specifications. (c) The specifications for the materials used such as the aluminum plate substrate, the reflective sheeting, and glue shall be drawn in a manner so that at least two manufacturers may qualify as suppliers. (d) The granting of contracts for the materials shall be by public bid.

(a) (i) All license plates to be manufactured and issued by the division shall be treated with a fully reflective material on the plate face that provides effective and dependable reflective brightness during the service period of the license plate. (ii) For a historical support special group license plate created under this part, the division shall procure reflective material to satisfy the requirement under Subsection (3)(a)(i) as soon as such material is available at a reasonable cost.

(i) All license plates to be manufactured and issued by the division shall be treated with a fully reflective material on the plate face that provides effective and dependable reflective brightness during the service period of the license plate.

(ii) For a historical support special group license plate created under this part, the division shall procure reflective material to satisfy the requirement under Subsection (3)(a)(i) as soon as such material is available at a reasonable cost.

(b) The division shall prescribe all license plate material specifications and establish and implement procedures for conforming to the specifications.

(c) The specifications for the materials used such as the aluminum plate substrate, the reflective sheeting, and glue shall be drawn in a manner so that at least two manufacturers may qualify as suppliers.

(d) The granting of contracts for the materials shall be by public bid.

(4) (a) The commission may issue, adopt, and require the use of indicia of registration it considers advisable in lieu of or in conjunction with license plates as provided in this part. (b) All provisions of this part relative to license plates apply to these indicia of registration, so far as the provisions are applicable.

(a) The commission may issue, adopt, and require the use of indicia of registration it considers advisable in lieu of or in conjunction with license plates as provided in this part.

(b) All provisions of this part relative to license plates apply to these indicia of registration, so far as the provisions are applicable.

(5) A violation of this section is an infraction.