LegalFix

Section 547.408. Performance Requirements for Brakes

TX Transp Code § 547.408 (2019) (N/A)
Copy with citation
Copy as parenthetical citation

Sec. 547.408. PERFORMANCE REQUIREMENTS FOR BRAKES. (a) A motor vehicle or combination of vehicles shall be equipped with service brakes capable of:

(1) developing a braking force that is not less than:

(A) 52.8 percent of the gross weight of the vehicle for a passenger vehicle; or

(B) 43.5 percent of the gross weight of the vehicle for a vehicle other than a passenger vehicle;

(2) decelerating to a stop from 20 miles per hour or less at not less than:

(A) 17 feet per second per second for a passenger vehicle; or

(B) 14 feet per second per second for other vehicles; and

(3) stopping from a speed of 20 miles per hour in a distance, measured from the location where the service brake pedal or control is activated, of not more than:

(A) 25 feet for a passenger vehicle;

(B) 30 feet for a motorcycle, moped, or single unit vehicle with a manufacturer's gross vehicle weight rating of 10,000 pounds or less;

(C) 40 feet for:

(i) a single unit vehicle with a manufacturer's gross weight rating of more than 10,000 pounds;

(ii) a two-axle towing vehicle and trailer combination with a weight of 3,000 pounds or less;

(iii) a bus that does not have a manufacturer's gross weight rating; and

(iv) the combination of vehicles in an operation exempted by Section 547.407(b); and

(D) 50 feet for other vehicles.

(b) A test for deceleration or stopping distance shall be performed on a dry, smooth, hard surface that:

(1) is free of loose material; and

(2) does not exceed plus or minus one percent grade.

(c) In this section, "passenger vehicle" means a vehicle that has a maximum seating capacity of 10 persons, including the operator, and that does not have a manufacturer's gross vehicle weight rating.

Acts 1995, 74th Leg., ch. 165, Sec. 1, eff. Sept. 1, 1995.

Amended by:

Acts 2019, 86th Leg., R.S., Ch. 882 (H.B. 3171), Sec. 2.13, eff. September 1, 2019.