(1) The facility is limited to acceptance of hazardous waste or PCB for treatment or disposal in an amount not to exceed 110 percent of the amount of hazardous waste or PCB treated or disposed by the facility under any permit. The Department of Environmental Quality shall approve acceptance of a greater amount of hazardous waste or PCB for treatment or disposal as part of a permit renewal or modification process if the applicant demonstrates that a greater amount of hazardous waste or PCB is necessary either to protect or to provide a higher level of protection of the public health and safety or of the environment.

(2) The facility complies with all applicable federal and Oregon technological requirements for treating and disposing of hazardous waste or PCB.

(3) The facility meets property line setback requirements established by the commission by rule.

(4) The facility owner, any parent company of the owner and the operator comply with all applicable Oregon and federal requirements for financial and technical capability to properly construct and operate the facility.

(5) The facility owner or operator owns or contracts with an emergency response provider or coordinator that can provide for timely response to a spill or release in Oregon of hazardous waste or PCB being transported to the facility by a motor vehicle owned by the owner or operator of the facility.

(6) Any person hired by the owner or operator of the facility to transport hazardous waste or PCB to the facility owns or has a contract with an emergency response provider or coordinator that can provide for timely response to a spill or release in Oregon of hazardous waste or PCB being transported by a motor vehicle to the facility.

(7) Upon arrival at the facility of any motor vehicle transporting hazardous waste or PCB not described in subsection (5) or (6) of this section, the owner or operator of the facility shall request to review the transporter’s authorization to transport hazardous waste or PCB in Oregon and the driver’s authorization to drive a motor vehicle transporting hazardous waste or PCB in Oregon. The owner or operator of the facility shall report to the department the name of any transporter or driver failing to demonstrate authorization. [1985 c.670 §6; 1987 c.540 §20; 1999 c.740 §4]