(c) any of the following offenses, where the defendant and the person against whom the offense was committed were members of the same family or household as defined in subdivision one of section 530.11 of the criminal procedure law and as established pursuant to section 370.15 of the criminal procedure law: assault in the third degree; menacing in the third degree; menacing in the second degree; criminal obstruction of breathing or blood circulation; unlawful imprisonment in the second degree; coercion in the third degree; criminal tampering in the third degree; criminal contempt in the second degree; harassment in the first degree; aggravated harassment in the second degree; criminal trespass in the third degree; criminal trespass in the second degree; arson in the fifth degree; or attempt to commit any of the above-listed offenses. 18. "Armor piercing ammunition" means any ammunition capable of being used in pistols or revolvers containing a projectile or projectile core, or a projectile or projectile core for use in such ammunition, that is constructed entirely (excluding the presence of traces of other substances) from one or a combination of any of the following: tungsten alloys, steel, iron, brass, bronze, beryllium copper, or uranium. 19. "Duly authorized instructor" means (a) a duly commissioned officer of the United States army, navy, marine corps or coast guard, or of the national guard of the state of New York; or (b) a duly qualified adult citizen of the United States who has been granted a certificate as an instructor in small arms practice issued by the United States army, navy or marine corps, or by the adjutant general of this state, or by the national rifle association of America, a not-for-profit corporation duly organized under the laws of this state; or (c) by a person duly qualified and designated by the department of environmental conservation under paragraph d of subdivision six of section 11-0713 of the environmental conservation law as its agent in the giving of instruction and the making of certifications of qualification in responsible hunting practices. 20. "Disguised gun" means any weapon or device capable of being concealed on the person from which a shot can be discharged through the energy of an explosive and is designed and intended to appear to be something other than a gun. 21. "Semiautomatic" means any repeating rifle, shotgun or pistol, regardless of barrel or overall length, which utilizes a portion of the energy of a firing cartridge or shell to extract the fired cartridge case or spent shell and chamber the next round, and which requires a separate pull of the trigger to fire each cartridge or shell. 22. "Assault weapon" means

(a) a semiautomatic rifle that has an ability to accept a detachable magazine and has at least one of the following characteristics:

(i) a folding or telescoping stock;

(ii) a pistol grip that protrudes conspicuously beneath the action of the weapon;

(iii) a thumbhole stock;

(iv) a second handgrip or a protruding grip that can be held by the non-trigger hand;

(v) a bayonet mount;

(vi) a flash suppressor, muzzle break, muzzle compensator, or threaded barrel designed to accommodate a flash suppressor, muzzle break, or muzzle compensator;

(vii) a grenade launcher; or

(b) a semiautomatic shotgun that has at least one of the following characteristics:

(i) a folding or telescoping stock;

(ii) a thumbhole stock;

(iii) a second handgrip or a protruding grip that can be held by the non-trigger hand;

(iv) a fixed magazine capacity in excess of seven rounds;

(v) an ability to accept a detachable magazine; or

(c) a semiautomatic pistol that has an ability to accept a detachable magazine and has at least one of the following characteristics:

(i) a folding or telescoping stock;

(ii) a thumbhole stock;

(iii) a second handgrip or a protruding grip that can be held by the non-trigger hand;

(iv) capacity to accept an ammunition magazine that attaches to the pistol outside of the pistol grip;

(v) a threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or silencer;

(vi) a shroud that is attached to, or partially or completely encircles, the barrel and that permits the shooter to hold the firearm with the non-trigger hand without being burned;

(vii) a manufactured weight of fifty ounces or more when the pistol is unloaded; or

(viii) a semiautomatic version of an automatic rifle, shotgun or firearm;

(d) a revolving cylinder shotgun;

(e) a semiautomatic rifle, a semiautomatic shotgun or a semiautomatic pistol or weapon defined in subparagraph (v) of paragraph (e) of subdivision twenty-two of section 265.00 of this chapter as added by chapter one hundred eighty-nine of the laws of two thousand and otherwise lawfully possessed pursuant to such chapter of the laws of two thousand prior to September fourteenth, nineteen hundred ninety-four;

(f) a semiautomatic rifle, a semiautomatic shotgun or a semiautomatic pistol or weapon defined in paragraph (a), (b) or (c) of this subdivision, possessed prior to the date of enactment of the chapter of the laws of two thousand thirteen which added this paragraph;

(g) provided, however, that such term does not include:

(i) any rifle, shotgun or pistol that (A) is manually operated by bolt, pump, lever or slide action; (B) has been rendered permanently inoperable; or (C) is an antique firearm as defined in 18 U.S.C. 921(a)(16);

(ii) a semiautomatic rifle that cannot accept a detachable magazine that holds more than five rounds of ammunition;

(iii) a semiautomatic shotgun that cannot hold more than five rounds of ammunition in a fixed or detachable magazine; or

(iv) a rifle, shotgun or pistol, or a replica or a duplicate thereof, specified in Appendix A to 18 U.S.C. 922 as such weapon was manufactured on October first, nineteen hundred ninety-three. The mere fact that a weapon is not listed in Appendix A shall not be construed to mean that such weapon is an assault weapon;

(v) any weapon validly registered pursuant to subdivision sixteen-a of section 400.00 of this chapter. Such weapons shall be subject to the provisions of paragraph (h) of this subdivision;

(vi) any firearm, rifle, or shotgun that was manufactured at least fifty years prior to the current date, but not including replicas thereof that is validly registered pursuant to subdivision sixteen-a of section 400.00 of this chapter;

(h) Any weapon defined in paragraph (e) or (f) of this subdivision and any large capacity ammunition feeding device that was legally possessed by an individual prior to the enactment of the chapter of the laws of two thousand thirteen which added this paragraph, may only be sold to, exchanged with or disposed of to a purchaser authorized to possess such weapons or to an individual or entity outside of the state provided that any such transfer to an individual or entity outside of the state must be reported to the entity wherein the weapon is registered within seventy-two hours of such transfer. An individual who transfers any such weapon or large capacity ammunition device to an individual inside New York state or without complying with the provisions of this paragraph shall be guilty of a class A misdemeanor unless such large capacity ammunition feeding device, the possession of which is made illegal by the chapter of the laws of two thousand thirteen which added this paragraph, is transferred within one year of the effective date of the chapter of the laws of two thousand thirteen which added this paragraph. 23. "Large capacity ammunition feeding device" means a magazine, belt, drum, feed strip, or similar device, that (a) has a capacity of, or that can be readily restored or converted to accept, more than ten rounds of ammunition, or * (b) contains more than seven rounds of ammunition, or (c) is obtained after the effective date of the chapter of the laws of two thousand thirteen which amended this subdivision and has a capacity of, or that can be readily restored or converted to accept, more than seven rounds of ammunition * NB Suspended and NOT Effective per ch 1/2013 § 58, as amended by ch 57/2013 Pt. FF § 4 ; provided, however, that such term does not include an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition or a feeding device that is a curio or relic. A feeding device that is a curio or relic is defined as a device that (i) was manufactured at least fifty years prior to the current date, (ii) is only capable of being used exclusively in a firearm, rifle, or shotgun that was manufactured at least fifty years prior to the current date, but not including replicas thereof, (iii) is possessed by an individual who is not prohibited by state or federal law from possessing a firearm and (iv) is registered with the division of state police pursuant to subdivision sixteen-a of section 400.00 of this chapter, except such feeding devices transferred into the state may be registered at any time, provided they are registered within thirty days of their transfer into the state. Notwithstanding paragraph (h) of subdivision twenty-two of this section, such feeding devices may be transferred provided that such transfer shall be subject to the provisions of section 400.03 of this chapter including the check required to be conducted pursuant to such section. 24. "Seller of ammunition" means any person, firm, partnership, corporation or company who engages in the business of purchasing, selling or keeping ammunition. 25. "Qualified retired New York or federal law enforcement officer" means an individual who is a retired police officer as police officer is defined in subdivision thirty-four of section 1.20 of the criminal procedure law, a retired peace officer as peace officer is defined in section 2.10 of the criminal procedure law or a retired federal law enforcement officer as federal law enforcement officer is defined in section 2.15 of the criminal procedure law, who: (a) separated from service in good standing from a public agency located in New York state in which such person served as either a police officer, peace officer or federal law enforcement officer; and (b) before such separation, was authorized by law to engage in or supervise the prevention, detection, investigation, or prosecution of, or the incarceration of any person for, any violation of law, and had statutory powers of arrest, pursuant to their official duties, under the criminal procedure law; and (c) (i) before such separation, served as either a police officer, peace officer or federal law enforcement officer for five years or more and at the time of separation, is such an officer; or (ii) separated from service with such agency, after completing any applicable probationary period of such service, due to a service-connected disability, as determined by such agency at or before the time of separation; and (d)(i) has not been found by a qualified medical professional employed by such agency to be unqualified for reasons relating to mental health; or (ii) has not entered into an agreement with such agency from which the individual is separating from service in which that individual acknowledges he or she is not qualified for reasons relating to mental health; and (e) is not otherwise prohibited by New York or federal law from possessing any firearm. 26. "Rapid-fire modification device" means any bump stock, trigger crank, binary trigger system, burst trigger system, or any other device that is designed to accelerate the rate of fire of a semi-automatic firearm, rifle or shotgun. 27. "Bump stock" means any device or instrument that increases the rate of fire achievable with a semi-automatic firearm, rifle or shotgun by using energy from the recoil of the weapon to generate a reciprocating action that facilitates repeated activation of the trigger. 28. "Trigger crank" means any device or instrument that repeatedly activates the trigger of a semi-automatic firearm, rifle or shotgun through the use of a lever or other part that is turned in a circular motion and thereby accelerates the rate of fire of such firearm, rifle or shotgun, provided, however, that "trigger crank" shall not include any weapon initially designed and manufactured to fire through the use of a crank or lever. 29. "Binary trigger system" means any device that, when installed in or attached to a semi-automatic firearm rifle, or shotgun causes that weapon to fire once when the trigger is pulled and again when the trigger is released. 30. "Burst trigger system" means any device that, when installed in or attached to a semi-automatic firearm, rifle, or shot gun, allows that weapon to discharge two or more shots with a single pull or the trigger by altering the trigger reset.