58:31-3 Inspections, testing by water purveyor.

3. a. Each water purveyor shall inspect each valve in its public water system in accordance with the provisions of subsection b. of this section in order to determine (1) accessibility of the valve for operational purposes, and (2) the valve's operating condition. A water purveyor shall repair or replace any valve found to be broken or otherwise not operational.

b. Each water purveyor shall inspect each valve that is 12 or more inches in diameter at least once every two years, and shall inspect all other valves at least once every four years , except that the requirements of this subsection shall not apply to any service connection valve or customer shut-off valve . At a minimum, each valve inspection conducted pursuant to this subsection shall include:

(1) clearing of the area around the valve to ensure full access to the valve for operating purposes;

(2) cleaning out of the valve box;

(3) dynamic testing of the valve, by opening and then closing the valve for either of the following number of turns:

(a) the number of turns recommended by the valve manufacturer to constitute a credible test; or

(b) the number of turns which constitutes 15 percent of the total number of turns necessary to completely open or completely close the valve ; and

(4) complying with any other criteria as may be required by the department pursuant to rules and regulations adopted pursuant to the "Administrative Procedure Act," P.L.1968, c.410 (C.52:14B-1 et seq.).

c. (1) Each water purveyor shall, once a year, test every fire hydrant in its system in order to determine the hydrant's working condition.

(2) Each water purveyor shall formulate and implement a plan for flushing every fire hydrant in the public water system, and every dead end of a main in the public water system. This plan for flushing may be combined with the periodic testing of fire hydrants required pursuant to paragraph (1) of this subsection.

d. Each water purveyor shall keep a record of all inspections, tests, and flushings conducted pursuant to this section for a period of at least six years.

e. Each water purveyor that owns, solely or jointly, a fire hydrant shall mark each hydrant with the initials of its name, abbreviation of its name, corporate symbol, or other distinguishing mark or code by which ownership may be readily and definitely ascertained. Each fire hydrant shall be marked with a number or symbol, or both, by which the location of the hydrant may be determined on the water purveyor's office records. The markings may be made with paint, brand, or with a soft metal plate, and shall be of such size and so spaced and maintained as to be easily read.

f. Each water purveyor shall identify, to the extent possible, the geographic location of each valve and fire hydrant in its public water system using a global positioning system based on satellite or other location technology.

L.2017, c.133, s.3.