Scope. Unless limited by a condition set out in a license, the export, reexport, or transfer (in-country) authorized by a license is for the item(s), end-use(s), and parties described in the license application and any letters of explanation. The applicant must inform the other parties identified on the license, such as the ultimate consignees and end users, of the license's scope and of the specific conditions applicable to them. BIS grants licenses in reliance on representations the applicant made in or submitted in connection with the license application, letters of explanation, and other documents submitted. A BIS license authorizing the release of “technology” to an entity also authorizes the release of the same “technology” to the entity's foreign persons who are permanent and regular employees (and who are not proscribed persons) of the entity's facility or facilities authorized on the license, except to the extent a license condition limits or prohibits the release of the “technology” to foreign persons of specific countries or country groups.

Issuance of a license. BIS may issue a license electronically via its Simplified Network Application Processing (SNAP-R) system or via paper or both electronically and via paper. Each license has a license number that will be shown on the license.

Changes to the license. (1) The following non-material changes do not require submission of a “Replacement” license or any other notification to BIS. (If you wish to make any change not identified in this paragraph, you will need to submit a “Replacement” license in accordance with the instructions contained in supplement no. 1 to part 748 of the EAR, Block 11):

Decrease in unit price or total value;

Increase in price if permitted under the shipping tolerances in § 750.11 of this part;

Increase in price that can be justified on the basis of changes in point of delivery, port of export, or as a result of transportation cost, drayage, port charges, warehousing, currency fluctuations, etc.;

Establishment of unit or total price in conformance with a “price statement” on a license that permits price to be based on the market price at a specified date plus an exporter's mark-up, or like basis;

Change in intermediate consignee if the new intermediate consignee is located in the country of ultimate destination as shown on the license, except a change in, or addition of, an intermediate consignee involving a consolidated shipment;

Change in continuity of shipment by unloading from carrier at a country listed in Country Group B (see supplement no. 1 to part 740 of the EAR) port not in the country of ultimate destination, without the designation of an intermediate consignee on the shipping documents and license, provided:

The purpose is to transfer the shipment to another vessel, barge, or vehicle, solely for onforwarding to the country of destination shown on the shipping documents and the license;

The shipment is moving on a through bill of lading;

The carrier is not registered in, owned or controlled by, or under charter or lease to a country in Country Group D:1 or E:2 (see supplement no. 1 to part 740 of the EAR), or a national of any of these countries;

The carrier retains custody of the shipment until it is delivered to the ultimate consignee; and

The original bill of lading or air waybill first issued at the port of export is delivered with the shipment to the ultimate consignee;

Change in address of purchaser or ultimate consignee if the new address is located within the same country shown on the license; or

Change in ECCN, where necessary only for the purpose of conforming to an official revision in the CCL; or wording of the item description. This does not cover an actual change in the item to be shipped, or an increase in the total price or quantity on the license.

Direct exports, reexports, or transfers (in-country) to and among approved end users and the ultimate consignee on a license, provided those end users and ultimate consignee are listed by name and location on such license and the license does not contain any conditions specific to the ultimate consignee that cannot be complied with by the end user, such as a reporting requirement that must be made by the ultimate consignee. Reexports and transfers (in-country) among approved end users may be further limited by license conditions; or

Export, reexport or transfer (in-country) of missile technology (MT) controlled minimum necessary “software” and/or “technology” permitted pursuant to the missile technology licensing policy in § 742.5(b)(3) of the EAR. (See § 742.5(b)(3)(i) for the scope of eligible minimum “software” and/or “technology” and other limitations for licenses for MT controlled items).

This MT licensing policy is implemented pursuant to paragraph (c)(1)(x) of this section because it applies to all MT licenses, except when a condition is placed on the license which excludes the use of paragraph (c)(1)(x) of this section, as described in § 742.5(b)(3)(ii).

License Exception TSU under § 740.13 of the EAR is available for the ECCNs controlled for MT reasons specified in paragraph (a)(5) in § 740.2, provided the software or technology is for an end use specified in that paragraph and meets the requirements of License Exception TSU. (See §§ 740.2(a)(5) and 740.13). The licensing policy in § 742.5(b)(3) is only available for licensed exports (or reexports, or transfers (in-country)).

In some circumstances, BIS may authorize changing the name of a person listed on a license (i.e., name of exporter, reexporter, purchaser, intermediate consignee, ultimate consignee or end user), provided the pertinent person has not undergone a change in ownership, including merger or acquisition, or any other change in legal status since the time the license was issued. In order to rely on this paragraph (c)(2), BIS must have approved the name change in response to an advisory opinion request submitted by the licensee pursuant to § 748.3(c) of the EAR and the instructions below.

The advisory opinion request must be submitted on the licensee's company letterhead and include the following information:

The title of the advisory opinion, in this format: “License name change notification and review request;”

All license numbers subject to the notification and review request (either in the letter or as a separate attachment);

The name(s) changing on the license(s) (include the original and new names), and when the name(s) are changing (either in the letter or as a separate attachment);

Any background information available on the reasons for the name change(s) (e.g., press releases from the person changing its name(s)); and

A statement regarding whether there has been a change in ownership, including a merger or acquisition, or any other change in legal status regarding the person(s) changing its name(s).

Confirmation that, if the request is approved, the licensee will share the advisory opinion response from BIS with all other persons listed on the license, and inform those persons that the advisory opinion response must be retained pursuant to the recordkeeping requirements in part 762 of the EAR.

If BIS determines the name change is not a material change to the license and approves the request to change the name(s) on the license, BIS will send a written response to the licensee who submitted the notification. If BIS does not approve the request to change the name(s) on the license, BIS will send a written response to the licensee who submitted the notification.

For guidance on using an export license with approved name changes, see § 758.4(d) (Exports against license with approved name change).

If a license name change notification and review request is denied by BIS or the licensee determines that there has been a material change to the license, such as a change in ownership of a person on the license, including merger or acquisition, or any other change in legal status since the time the license was issued, a new license application should be submitted.

Responsibility of the licensee. The person to whom a license is issued is the licensee. In export transactions, the exporter must be the licensee, and the exporter-licensee is responsible for the proper use of the license, and for all terms and conditions of the license, except to the extent that certain terms and conditions are directed toward some other party to the transaction. In reexport or routed export transactions, a U.S. agent acting on behalf of a foreign principal party in interest may be the licensee; in these cases, both the agent and the foreign principal party in interest, on whose behalf the agent has acted, are responsible for the use of the license, and for all terms and conditions of the license, except to the extent that certain terms and conditions are directed toward some other party to the transaction. It is the licensee's responsibility to communicate in writing the specific license conditions to the parties to whom those conditions apply. In addition, when required by the license, the licensee is responsible for obtaining written acknowledgment(s) of receipt of the conditions from the party(ies) to whom those conditions apply.

Prohibited use of a license. No person convicted of a violation of any statute specified in section 11(h) of the EAA, at the discretion of the Secretary of Commerce, may apply for any license for a period up to 10 years from the date of the conviction. See § 766.25 of the EAR.

Quantity of commodities authorized. Unlike software and technology, commodities will be approved with a quantity and dollar value limit. Any license resulting from a license application to export or reexport commodities will be licensed in terms of the specified unit of quantity commonly used in trade. A total dollar value for the commodity will be authorized based on the per unit price of the commodity. Subject to the shipping tolerances authorized in § 750.11 of this part, the authorization is limited by both the quantity and value listed on the license.

License validity period. Licenses involving the export or reexport of items will generally have a four-year validity period, unless a different validity period has been requested and specifically approved by BIS or is otherwise specified on the license at the time that it is issued. Exceptions from the four-year validity period include license applications for items controlled for short supply reasons, which will be limited to a 12-month validity period and license applications reviewed and approved as an “emergency” (see § 748.4(h) of the EAR). Emergency licenses will expire no later than the last day of the calendar month following the month in which the emergency license is issued. The expiration date will be clearly stated on the face of the license. If the expiration date falls on a legal holiday (Federal or State), the validity period is automatically extended to midnight of the first business day following the expiration date.

Extended validity period. BIS will consider granting a validity period exceeding 4 years on a case-by-case basis when extenuating circumstances warrant such an extension. Requests for such extensions may be made at the time of application or after the license has been issued and it is still valid. BIS will not approve changes regarding other aspects of the license, such as the parties to the transaction and the countries of ultimate destination. An extended validity period will generally be granted where, for example, the transaction is related to a multi-year project; when the period corresponds to the duration of a manufacturing license agreement, technical assistance agreement, warehouse and distribution agreement, or license issued under the International Traffic in Arms Regulations; when production lead time will not permit an export or reexport during the original validity period of the license; when an unforeseen emergency prevents shipment within the 4-year validity of the license; or for other similar circumstances.

Request for extension. (i) The applicant must submit a letter in writing to request an extension in the validity period of a previously approved license. The subject of the letter must be titled: “Request for Validity Period Extension” and contain the following information:

The name, address, and telephone number of the requestor;

A copy of the original license, with the license number, validation date, and current expiration date legible; and

Justification for the extension;

It is the responsibility of the applicant to ensure that all applicable support documents remain valid and are in the possession of the applicant. If the request for extension is approved, BIS will provide the applicant with a written response.

Specific types of licenses—(1) Licenses for temporary exports or reexports. If you have been granted a license for the temporary export or reexport of items and you decide not to return the items to the United States, you must submit a license application requesting authorization to dispose of the items. Except when the items are to be used on a temporary basis at a new destination (and returned to the United States after such use), you must ensure that your license application is accompanied by all documents that would be required if you had requested a license to export or reexport the same item directly to the new destination.

Intransit within the United States. If you have been issued a license authorizing an intransit shipment (that does not qualify for the intransit provisions of License Exception TMP) through the United States, your license will be valid only for the export of the intransit shipment wholly of foreign origin and for which a Transportation and Exportation customs entry or an Immediate Exportation customs entry is outstanding.

Intransit outside the United States. If you have been issued a license authorizing unlading or transit through a country listed in the General Prohibition Eight contained in § 736.2(b)(8) of the EAR, and you did not know the identity of the intermediate consignee at the time of the original license application, you must notify BIS in writing once you have ascertained the identity of the intermediate consignee. Your notification must contain the original license number, and the complete name, address, and telephone number of the intermediate consignee. The written request must be submitted to BIS at the address listed in § 748.1(d)(2) of the EAR.

Replacement license. If you have been issued a “replacement license” (for changes to your original license not covered in paragraph (c) of this section), you must retain both the original and the replacement license.

Terminating license conditions. Exporters or reexporters who have shipped under licenses with conditions that would not apply to an export under a License Exception or if no license was required, and foreign consignees who have agreed to such conditions, are no longer bound by these conditions when the licensed items become eligible for a License Exception or can be exported or reexported without a license. Items that become eligible for a License Exception are subject to the terms and conditions of the applicable License Exception and to the restrictions in § 740.2 of the EAR. Items that become eligible for export without a license remain subject to the EAR and any export, reexport, or disposition of such items may only be made in accordance with the requirements of the EAR. Termination of license conditions does not relieve an exporter or reexporter of its responsibility for violations that occurred prior to the availability of a License Exception or prior to the removal of license requirements.

Records. If you have been issued a license you must retain the license, and maintain complete records in accordance with part 762 of the EAR including any licenses (whether used or unused, valid or expired) and all supporting documents and shipping records.

For Federal Register citations affecting § 750.7, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.