§ 429.49 - Traffic signal modules and pedestrian modules.

Copy with citation

Copy as parenthetical citation

Sampling plan for selection of units for testing. (1) The requirements of § 429.11 are applicable to traffic signal modules and pedestrian modules; and

For each basic model of traffic signal module or pedestrian module selected for testing, a sample of sufficient size shall be randomly selected and tested to ensure that—

Any represented value of estimated maximum and nominal wattage or other measure of energy consumption of a basic model for which consumers would favor lower values shall be greater than or equal to the higher of:

The mean of the sample, where:

The upper 95 percent confidence limit (UCL) of the true mean divided by 1.10, where:

Any represented value of the energy efficiency or other measure of energy consumption of a basic model for which consumers would favor higher values shall be less than or equal to the lower of:

The mean of the sample, where:

The lower 95 percent confidence limit (LCL) of the true mean divided by 0.90, where:

Certification reports. (1) The requirements of § 429.12 are applicable to traffic signal modules and pedestrian modules; and

Pursuant to § 429.12(b)(13), a certification report shall include the following public product-specific information: The maximum wattage at 74 degrees Celsius (°C) in watts (W), the nominal wattage at 25 degrees Celsius (°C) in watts (W), and the signal type.

Previous Section

§ 429.48 - Illuminated exit signs.

Next Section

§ 429.50 - Commercial unit heaters.